feature-bar
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF
Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF

Happymodel Mobula7 V2 75mm Crazybee F4 Pro V2 2S Whoop FPV Racing Drone w/ Upgrade BB2 ESC 700TVL BNF

sold in last hours

Regular price $226.50 Sale price $210.95 Save $15.55
 

⏩ 5 to 7 days Delivery to USA, 11 days Delivery to UK, CA, DE, FR, & AU.
⏩ 15 to 25 days Delivery to All Other Countries.


Specification: 
Brand Name: Happymodel
Model: Mobula7 V2
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm

Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package charger.
   Basic Version: USB Charger
   Standard Version: 6-way Charger
Size: 98mm*98mm*36mm
Weight: 25.9g (without battery) ; Take Off Weight: about 44g
Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter

Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
Firmware
(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
Onboard 5A 4 In 1 ESC

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600

Onboard Frsky NON-EU receiver Version SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300M 
Onboard Frsky EU-LBT Version
(External XM+ receiver)
 

Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output on board: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI

Onboard Flysky receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Onboard DSM2 / DSMX receiver version
Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
SE0802 16000KV Motor KV: 16000KV; Configu-ration: 9N12P
Support 1-2S Lipo; Stator Diamter: 8mm; Stator Length: 2mm
Shaft Diameter: Φ1.0; Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
Propeller 40mm 4-blade Propeller ( 4 CW + 4 CCW)

5.8G VTX AIO Camera
 
Output power: 25mW;Input voltage: 3.3- 5.5V;Current consumption: 300mA(type)
Camera resolution: 700TVL; Field of view: 120°; Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9"12.0mm ( L*W ); Weight: 3g

3.8v 250mAh Lipo Battery
 Notes: Need 2pcs batteries for Series circuit

Connector: PH2.0
Continuous Discharge Rate: 30C; Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm; Weight: 6.5g
Features:
- 2S whoop more powerful and more flight time
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- Smartaudio ready , change VTX bands, channels via OSD
  DSM2/DSMX and Frsky EU-LBT version are Serial-based receiver, so Smartaudio is not compatible.
- Adjust the settings and the PID of the flight controller via OSD
- Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
- Flysky version support both AFHDS and AFHDS-2A protocol transmitter
- DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
- Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version
- Buzzer Ready

Package Included:
Basic Version
1x Mobula7 V2 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver

Standard Version
1x Mobula7 V2 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery

1x Screwdriver








OUR POINTS CUSTOMER PROMISE:

✔️ 30-Day Money Back Guarantee
✔️ Tracking Number for Every Order
✔️ Safe Payment Via Stripe or Paypal
✔️ Real People on Our Internet Helpdesks
✔️ Best Price Guarantee

NOT AVAILABLE IN LOCAL STORES!

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Sale

Unavailable

Sold Out

Click to edit the product in Ali Orders.
Note: only show for shop owner